VDA Screw-in / push in nipple NW12 - M18x1.5 for Normaquick® PS3
Brand:
IQ-Parts
- Buy 10 for €7,38 each and save 10%
- Buy 25 for €6,56 each and save 20%
Article number: | NOR-40061033X |
SKU: | 40061033X |
- 2 year warranty
- Delivery time: 2-3 weeks
Information
VDA Screw-in / push in nipple NW12 - M18x1.5 for NORMAQUICK PS3
Screw-in / push in nipple according to VDA (suitable for NORMAQUICK® PS3) and SAE (SAE J2044)
VDA screw-in nipple NW 12 - M18x1,5 for NORMAQUICK PS3 for screwing in, has a nominal width of 12 (NW 12). This means that the internal size of the screw-in nipple is 12 mm. The male thread M18x1,5 makes it possible to screw in the nipple. Due to the EPDM seal (under the hexagon), the screw thread does not need to be additionally sealed.
Connectors according to the VDA standard (suitable for NORMAQUICK® PS3) and according to the SAE standard (SAE J2044) have been established connection solutions in the vehicle industry for many years. These plug-in systems are mainly used for air or liquid pipes in the field of temperature control systems (cooler pipes / heating pipes), air systems and fuel systems. A male nipple (eg for a threaded connection on the cooler) or possibly a pipe connector with a standardized VDA or SAE connector is required as a counterpart to the connector on the air or liquid lines.
Tightening torque: 50 + 10 Nm
Medium: cooling water
Operating pressure: 2 bar max.
Temperature: -40°C to +135°C (short-term up to +150°C)
The screw-in nipple is supplied with an EPDM O-ring as standard. If you want a Viton O-ring, please select it in the menu at the top recht.
The O-rings are also available, on request, in the following materials:
(Click on the material for their properties)
Specifications
Seal: | EPDM (= Standard) |
Hose connection: | Screw in M18 x 1.5 |
Weight: | 26 Gram |
Connection: | 0° |
Dimensions: | NW12 |
Operating pressure: | 2 bar Max. |
Temperature range: | –40°C to +135°C, Short time up to +150°C (approx. 30 min.) |
Material: | Aluminium |
Medium: | Cooling Water |