• Kostenloser Versand ab €100.-
  • Orders before 14:00, same-day shipment
  • 20% KORTING OP VOLLE DOZEN

Oetiker 180 Universal Worm Drive Clamp W4

€11,86 Incl. tax €9,80 Excl. tax
* Excl. tax | Excl. Shipping costs
Nu 16 Piece artikelen nog op voorraad
Delivery time: Ordered before 14:00 next working day
Article number: OTK-18000206
SKU: 18000206
  • 2 year warranty
  • Delivery time: Ordered before 14:00 next working day
  • Customer service 09:00 - 17:00
Information

Oetiker Universal Worm Drive Clamp W4, 12 mm width, with Allen screw

 

Screw Clamp design Flap lock
After opening the body, the band can be formed by hand to ap- proximately the clamping diameter. The flap can then be closed, and the clamp tightened by turning the screw. As a result, the screw only has to be turned for the last part of the clamping operation.
 
Intermediate stop
The flap is secured by an intermediate stop. Even when loosely assembled, clamps cannot open on their own accord.
 
Visual overload protection
The housing incorporates a web which distorts visibly above a tightening torque of 4–5 Nm (35–44 in-lbs). This visual feature indicates that a Worm Drive Clamp is optimally tightened and still has an adequate factor of safety to the maximum tightening torque.
 
Assembly Recommendations
For safe tightening of screw clamps without wing screws, we recommend use of a 5A/F hexagon wrench. The maximum static tightening torque is 6 Nm (53 in-lb).
 
Installing an Universal Worm Drive Clamp
Measure the circumference to be clamped and cut off the band to that length. Pass the end of the band, from above, through the slit in the closing element, and fold it back at least 40 mm below the band. Pass the second end of the band through the slit in the perforated part of the closing element and fold it back at least 40 mm. Lay the band around the part to be clamped, push the band end with perforation below the flap lock and close.
 
The Oetiker Universal Clamp Band must be ordered separately!!
(This universal tension band is available in our shop in 8 or 12 mm band width, each on rolls with lengths of 10, 20, or 30 m.)


Bandimex eindeloze slangklem
 
Product code: 

18000206 - 18000025 - 18000026 - 18000027 - 18000028 - 18000029 - 18000030 - 18000031 - 18000032 - 18000033 - 18000034

Specifications
Tightening torque: 6 Nm (Maximum)
Bandwidth: 12 mm
Bolt: SW 5 mm Allen Screw or Wing Screw
Oetiker Oetiker 180 Universal Worm Drive Clamp W4
Reviews
No reviews found
Read or write a review
Webwinkel Keur
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »