• Kostenloser Versand ab €100.-
  • Orders before 14:00, same-day shipment
  • 20% KORTING OP VOLLE DOZEN

Oetiker Adjustable Band Clamps 159 - W4 (AISI 304)

€1,40 Incl. tax €1,16 Excl. tax
(Unit price: €1,16 / Piece)
* Excl. tax | Excl. Shipping costs
Nu 141 Piece artikelen nog op voorraad
Delivery time: Ordered before 14:00 next working day
  • Buy 100 for €0,93 each and save 20% (€0,93 / Piece)
  • Buy 200 for €0,81 each and save 30% (€0,81 / Piece)
Article number: OTK-15900002
SKU: 15900002
  • 2 year warranty
  • Delivery time: Ordered before 14:00 next working day
  • Customer service 09:00 - 17:00
Information

Oetiker Adjustable Band Clamps Type 159 - W4 (AISI 304)

 
PG 159 clamps are supplied flat. The clamp must be shaped prior to assembly. Each incremental step of the interlock reduces the diameter before closure by approximately 1.6 mm. The following assembly steps demonstrate how best to achieve an effective geometry. The clamp ear of both variants should be closed with constant tool jaw force, this practice is referred to as “force priority closure”. This assembly method ensures that a uniform and repeatable stress is applied to the application with a constant tensile force on the mechanical interlock.

Multi-position interlock
The interlock consists of one or two load-retaining hooks that withstand tensile loading during closure and a lock tab designed to hold the hooks in their windows prior to closure.

Article 15900002 & 15900004 Version with interlock outside !!!
Article 15900005 & 15900007 Version with interlock inside !!!

With both designs the interlock can be engaged in several positions within the published range. This feature allows a single part to cover a range of diameters.

Read the installation instructions from the PDF carefully, because the interlock inside must be mounted differently than the interlock outside!

General recommendations
The ears of these clamps are closed with the recommended uniform force (so-called force priority). This method results in an even distribution of stress within the clamp material, without overloading either the clamp or the assembled parts. The nominal diameter of the clamp should always be chosen so that when installed with the correct clamping force, the ears are nearly closed. Complete process monitoring and 100% process documentation are available when using the "Electronically Controlled Pneumatic Power Tool Oetiker ELK" from Oetiker.

Closing force
The table (PDF) shows the maximum applied closing force for different material dimensions.

Important
Single use of the Ear Clip! Do not loosen the ear clip and use it again.

 

Oetiker Adjustable Band Clamps

 

EAN number : 8718953235210

 

Specifications
Tightening torque: See PDF
Bandwidth: 7 mm
Bolt: --
Oetiker Oetiker Adjustable Band Clamps 159 - W4 (AISI 304)
Reviews
10 / 10
(1)
10 / 10
Lodewijk Hamstra 05 December 2017

Super levering en super ashoes klemmen werkt perfect !

Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »