Flexseal - Inside/Outside-Adapter
Brand:
Flexseal
| Article number: | FLS-AI125-123-127 |
| SKU: | IA125 |
- 2 year warranty
- Delivery time: 2-3 weeks
Information
Flexseal - Inside/Outside-Adapter
The Flexseal Inside/Outside-Adaptor connects all pipes that are circular on the inside, such as concrete pipes with at-base, reinforced pipes or wall ducts.
The adaptor consists on one side of an inner sleeve made of an impact-resistant ABS material with a lip seal that is inserted into a defined pipe or borehole. The opposite side simulates the spigot end of a commercially available plastic pipe (e.g. KG / KG2000).
The adaptor consists on one side of an inner sleeve made of an impact-resistant ABS material with a lip seal that is inserted into a defined pipe or borehole. The opposite side simulates the spigot end of a commercially available plastic pipe (e.g. KG / KG2000).
This creates many connection options:
- Direct connection with KG socket
- Connection with Flexseal 2B1 universal coupling All-In-One
- Connection to pipe spigot using standard coupling type 2B
- Connections with adaptor couplings or drainage couplings.
Product Benefits:
- Pushfit connection – no tools required
- Easy installation – within minutes
- Safe against shear loads
- No cleaning of the outside surfaces required
All our Internal Couplings
With our selection of Flexseal Internal Couplings, pipes such as plastic, cast iron and steel pipes with the same inner diameter can be joined quickly and easily, regardless of the outer diameter. They are used when, for various reasons, no normal couplings can be used. This is the case, for example, when a pipe is cut flush, a concrete pipe with a foot or a pipe with a damaged or uneven surface.
Product Benefits:
- Significantly reduces labour time for connecting problem pipes
- Watertight connection on any pipe material
- Connects pipes of differing or irregular outside diameters
- No need to expose external surface of pipe
- Pipe stop indicates that the product is properly installed, when it is flush to the pipe end
- Passes pressure tests
- Provides shear load protection
- The whole range conforms to the requirements of BS EN 295-4:2013
Productcode:
AI125 - AI150 - AI200 - AI225 - AI250 - AI300
